Category: Architecture

Time for a greener architecture

home15

For more articles like the one below please visit us at Plymouth architects

The Gestalt school identified several principles of use to artists and architects, but the most important is that of balance – that is, the constantly shifting balance that balances all opposites within the constantly shifting matrix of reality. Interestingly the principles of form found in the natural world are not dissimilar to the Gestalt principles that also operate in the unselfconscious human building traditions I referred to at the beginning of this article. Vernacular building traditions have evolved slowly over long periods of time and thus possess some of the coherent organic order found also in Nature. As in animal architecture, vernacular architecture possesses an inherent beauty: the beauty of integrity and unity. Such beauty emerges from the totally balanced integration of a system, its function and use into the broader realms of Nature.

So have we stumbled onto the reason why so many modern human-made environments fail to come up to the quality of some older towns and cities? At root the problem seems to lie in the spiritual posture that we adopt with Nature. Many people would now accept that as humans we are completely co-terminal with Nature. However, in claiming ownership, as we do, of that part of Nature that we call -self’, we not only separate ourselves from Nature but also separate ourselves from our own environments. Yogis tell us that the transcendental world of the spirit – the world of unity and pure consciousness – supports the relative world at each point. They tell us that the transcendental realm is a world without qualities yet gives rise to and sustains all qualities. They tell us that it is to be found in the -gap’ between the different states of consciousness: waking, dreaming and sleep; in the silences in music; between syllables in spoken language and even between our thoughts. The great 19th-century Indian holy man Ramakrishna Paramahansa was once asked, -Where do I find God?- His reply was, -Look between two thoughts.- This gap between perfectly balanced opposites is where life and spirit enter the relative world. It is also the vital middle ground between a subject and an object that defines the -mean’ and gives the meaning.

In conclusion we can say that it is order that gives life to a work and it is order that gives a work its spiritual dimension. It is in the perfect orderliness of a great work that the two worlds of materiality and spirit conjoin. Order is the agent that serves as the conduit between these two realms. Dare we say that -orderliness’ is next to -Godliness’?

Plymouth architects

Storytelling through Architecture

home17

By Marina Correa Photography: Philippe Ruault; courtesy the architects

The Giraffe Childcare Centre designed by Hondelatte Laporte Architects introduces a dollop of fantasy into the routine lives of suburban Parisian townsfolk-

Niched between a towering structure, next to a neighbourhood built in the 70s and a newly constructed area, it was imperative that the healthcare centre did not -get lost’ within the urban landscape – hence the building is composed of three tiers and each is identified by a unique concrete animal sculpture.

The facades of the building are made out of white corrugated iron that provides a minimal background to the animal sculptures.

Interestingly, each of the south-facing playgrounds is in continuity with the interior spaces; while the urban landscape is animated using a child’s imagination. The wild animal sculptures appropriate a space: a giraffe appears to be peacefully eating the leaves of the trees from the neighbouring park; a polar bear tries to clamber up the steps, while a family of ladybirds climbs the faade in an attempt to reach the interior patio.

Architecture turns into storytelling. The building changes its identity and becomes a landscape in its own right; a metaphor for the urban jungle. The animals and the trees link the building to nature and motion.

Besides infusing a playful and poetic element, this building has also been awarded a green, zero energy efficiency label, making it not just aesthetically appeasing but also one that respects its environment.

Becoming a prominent landmark for the nursery, the affable animal forms transport us to a make-believe world. When pondered upon, definitely a project that goes way beyond the surface to attribute human characteristics and ethos to the emotional, functional routine of a child daycare centre.

to view images click on globalhop.indiaartndesign.com

Importance of AutoCAD in the field of engineering and architecture

images2

Computer has recently entered in every field known to any man and it gives great results when it was used. In the field of architecture and engineering, the need for the computer has become a necessity now a days there is no such work possible, which is made without using a computer. As technology has improved recently, so the choice of technical tools and specific software, which are used in these areas. And for this reason that the CAD or computer aided design and its improved version of the CADD or computer aided design and projects have emerged from behind the scenes to bring a sigh of relief for those who find that it is very hectic and time to sit down and design images of a building and the project plan for the purpose of engineering.

The AutoCAD or computer aided design machine has been a great help to engineers and also for several architectures that are finding it impossible to deal with drawings and plans of the project engineering work and the bring on the verge of perfection. The AutoCAD in these cases helped to design the architectural perfection before designing the actual architecture involved in the project. The AutoCAD has a very user friendly interface and its programming by the end had been done with the help of the famous C + + compiler. It operates in accordance with several other programs such as LISP, Auto LISP, VBA,. NET etc. and this may be one of the suits and tools used by engineers to simplify their work perfect.

Autocad or commonly known as computer aided design is a software application for writing and design 2D and 3D. He came on stage during the month of December nineteen hundred and eighty two. Autocad pioneered programs / DAC held on personal computers, particularly IBM personal computer. Meanwhile, the programs of most other CAD used to run on minicomputers or mainframes that were connected to the terminal graph of each user’s computer. vertical products Autocad and Autocad are incompatible for the type of BitDefender software security.

Appended below are the guidelines for free download for AutoCAD and AutoCAD relevant information about the free download. What we have to do is download the autocad trial for 30 days and learn about the design in 2D and 3D design and documentation platforms. One will have the opportunity of receiving the current version of CAD software with free download autocad. It can shape and design the world around him with the help of powerful and flexible features of AutoCAD design software and documentation, with the help of 2D and 3D worlds leading CAD tools.

Latest Information about Autocad

How is 3D printing technology used in Architecture and Medicine

home14

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

Enjoy the Architecture of Guru Ka Tal during Your Agra Tour

images3

Agra, which is located on the banks of the holy Yamuna River in the state of Uttar Pradesh, is world-famous for the majestic Taj Mahal. The city served as a prominent seat of the Mughal Empire for a long period and was the capital of Hindustan during that time. It lies at a distance of about 200 km from the national capital – New Delhi and easily accessible by road, rail and air transport from different parts of the country. The city has an extreme climate in winters and summers, with moderate temperatures in the rest seasons. October to March is considered as the ideal time to visit this historical city. If you wish to witness the grandeur of Taj Mahal and other prominent attractions of this place, such as Agra Fort, Jama Masjid, Moti Masjid, Fatehpur Sikri and Guru Ka Tal, then go for an Agra tour that can be availed from various travel agencies and travel portals.

Guru Ka Tal – History and Architecture

Originally, this reservoir was constructed in the year 1610, during the reign of Emperor Jahangir beside the tomb of Itibar Khan Khwajasara, to collect and preserve rainwater. The walls and embankments of this water reservoir have been made of rubble masonry and brick. It has a square design, with a long and wide ramp paved with stone slabs (khurra) and upright bricks, and stepped ghat. The walls of this structure feature four double-storied towers having an octagonal design. The top storey of these towers boasts of Mughal architecture, with an octagonal spire with brackets and pillars. The material that was used for constructing the ghat was red sandstone while the spire had been decorated with dazzling tiles. Constructed on a four feet high platform, this reservoir features four chhatris on its four corners with 16 pillars, with carved brackets and capitals. The corner domes of this place have a spherical design while the one on the sides have an oblong design.

At the time it was built, this reservoir had 12 towers, but today only eight can be seen. It had effective inlets of northern and western parts of the tank; a canal used for channelling excessive water in to the river and a dam on its south-eastern side. The water collected in this reservoir was used during dry seasons for irrigation. The terrace on the top floor is accessible through a wide red sandstone stairway, located on the southern side.

If you wish to witness Taj Mahal and other important attractions of Agra, then choose for those tour packages that include trips to all these important places. As this city offers a lot of see and to do, it gives the ideal opportunity to experience the best of India holidays.

Multisynth-based Architecture

images4

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

BIM Modeling- Adding Technical Advantages to Construction and Architecture

images4

With the extensive advancements in technology, the process of construction and architecture have become more organized and streamlined. A highly precision and technology driven process, BIM modeling consists of steps for generating as well as managing digital blueprints of a building, irrespective, of its nature whether a factory, hotel, office or any other form of physical structure. The process of digitizing important data relevant to the construction of a building, aids decision-makers to make critical judgments and evaluations about modification across its lifespan including in habitation, operation, and demolition. It is now highly appreciated by architects, civil engineers, constructors and others occupied in construction of a building and infrastructure sector across the globe.

To carry out the entire project management in an effective manner, a BIM Manager or a VDC Project Manager takes control of the entire process. In projects, they work in co-ordination with Design Construction Team on behalf of the client. However, companies are also hiring BIMs at different stages of the project delivery and handling. Thus, the intensive level of dynamism and ease of customization provided by converting these important data into a suitable digital format, construct multifunctional structure on the surface. The engineering solutions offered by expert companies are now preferred by every construction firm for their projects.

A revelation to traditional building design systems that were initially dependent on two-dimensional drawings of building sections, plans, elevation and other parts, digitization of maps offers numerous advantages. It offers updated technology which include the 3D maps and introduction of factors such as time and cost as an essential part of the project data, the other two important dimensions to modern day digitized maps of home and offices.

It not only included, geometric calculations into building maps but also comprised of other factors as mention of surface space, geographic study, building material study, ergonomics, green building, light analysis, etc. which were neglected earlier. This provides an efficient solution for building construction in the hands of architects and engineers.

Many companies specializing in Engineering Design Services ensure that they make use of this sophisticated technology to offer customized solutions as per the construction concepts, ideas, and design requirements put forth by clients. The design tool of this building solution presents the different views of a building model for construction and other usages of the building. In this model, a slight change in a one object of the model or design, automatically, changes other dependent model and an architect do not need to break model for every change.

The author is an experienced Content writer and publisher for Business Development. Visit us to know more about Engineering Design Services, BIM modeling and Digitization of maps.

The Architecture And Configuration Of J2me Application Development

home8

J2ME or also know as Java ME is a platform that is specifically designed for application development to run on mobile phones, PDAs and other embedded systems. J2ME development features an adaptable user interface, which integrates with network protocols and extends support for mobile application development. The mobile applications that are developed on J2ME can be also migrated across various different mobile devices. J2ME application developers create a variety of different mobile applications based on the customized requirements of the clients. They are experience in creating diverse mobile solutions and hence most clients prefer to outsource their mobile business applications to India.

J2ME Architecture and configuration
J2ME comprises of configurations and profiles that allow a developer to customize it for the Java Runtime Environment (JRE). The configuration defines the JVM used and the profile adds domain-specific classes to define the application.

Configurations: The configuration uses a set of core classes and a specific JVM to define the basic run-time environment. The configurations are of two types where one is called CLDC for handheld devices and the second one is CDC for plug-in devices. CLDC is has been developed for 16-bit or 32-bit small computing devices that have limited memory. CDC requires a 32-bit architecture and has at least 2 MB of memory and implements a functional JVM.

Profiles: A profile comprises of classes that allow J2ME application developers to execute features that are typically available on a group of small computing devices. The profiles used with CLDC are mobile information device profile (MIDP) and PDA profile (PDAP). The profiles used with CDC include Foundation Profile, Game Profile, Personal Profile, Personal Basis Profile and RMI Profile.

J2ME Architecture
The J2ME architecture consists of five layers and they are as follows:

MIDP: This is the topmost layer and consists of Java APIs. J2ME application developers use these APIs to create network connections, storage, and user interface. It also provides access to CLDC libraries and MIDP libraries.
J2ME APIs: This is the profile that comprises of a minimum set of application programming interfaces required for the small computing devices.
Configurations: This is responsible to manage the interactions between the JVM and the profile.
JVM
Operating System: This is the bottom layer.

What is the importance of enterprise architecture

home5

Information technology is growing swiftly across the globe with new industrial requirements. There are many organizations that are categorized under IT industry. These organizations are combating to enhance the business performance and productivity. There are many business streams in IT industry such as marketing, banking, software and hardware resource development, IT services, management services and many more. These days, most of the organizations are implementing several business management services to enhance the organizational competency and performance. Enterprise architecture (EA) is one of them that help the organizations to increase the business. It is simply defined as the process of converting business methods and vision into an effective way by improving and communicating the models, key requirements, and principles of the existing business.

EA helps the business enterprises to understand the products and platform, strength and weakness and can also resolve several industrial issues. It can improve the business efficiency by delivering faster services. It can develop a relationship with business executives by translating the industrial needs and insights into strategies. These days, business is growing with raising requirements and requires some management services to control the business. It can also describe the organizational evolution by enhancing the business models and principles.

IT organizations are offering several openings for enterprise architecture jobs to enhance the business relationship between the clients and customers and to increase the growth. It has associated with the external environment including business processes and information technologies. The individuals, who work in this platform, are designated as enterprise architects. These architects support the organization by handling several business challenges and implementing the solutions to enhance the performance.

There are many frameworks in EA such as IAF, DoDAF, TOGAF, EAF and many more to provide multiple benefits to augment the organizational productivity. It is the main platform to connect entire business units in the industry. It is considered the best business factor due to its trends such as focus on diversification, breakdown of industry barriers, growing data density, prominence between growth and performance, rate of product innovation, personalized goods and services and many more to maintain the industrial standards. It is not only important in IT industry, but also in other industries such as banking, government sector, healthcare, telecommunications and many other sectors.

Get more information on: Enterprise Architecture Jobs & IT Service Desk Jobs

The Benefits Of Service Oriented Architecture In Software Development

home1

Education is just a area with actually changing impetus. With good invasion of web and on the web services in most walk of present day life, one will need personalized development that’s simple and more user-friendly. With ADF (software development platform) and SOA (service oriented architecture), a strong doorway have been made by a new era of agile programming. Pc software improvement or internet development needs one to be constantly updated with the most recent systems on the market to generally meet client’s dependence on a simple and receptive software.

Extremely high level licensed programs can quickly be present in famous organizations to supply also corporate Hadoop training, ADF training, SOA training, and intense Hadoop training. Practical implementations of those systems possess a good method for any entrepreneur in addition to for the info technology world. Let’s comprehend both facades individually.

From THIS notion

PC software builders think it is excessively versatile and easy to program elements that may be recycled and designed without worrying all about the implementation program language and system.

Platform autonomy: SOA seeks to supply a nimble software that’s free from any program language worry or host system.

Architectural freedom: Technologies like SOA and ADF enables a scalable and flexible system to create composite development easier and recyclable.

High utility: Such systems gather several resources together that work with client’s fulfillment and easiness. For instance, it enables managing to Emails, charge cards and charging from the simple system.

From company notion

Similar to the quick changes in internet sites, the fundamental business methods are also changed to be secure, significantly quick, and significant. Entrepreneurs require a simple program for numerous procedures. ADF and soa systems have made their lives simple to use application and easier with modern programs.

Reusable components: Each element is individually made to be recycled for quantity of programs. Data freedom: Enormous information from disparate platforms is saved within an structured manner to be refined according to necessity. Performance control: Due to various elements and structure independent data, monitoring the company efficiency becomes simple by climbing different variables like revenue, manufacturing, structure an such like. Agility: The fundamental structure becomes quite durable and nimble for any new function or service; only a element needs to be included instead of altering the entire application or software. Economical: Being system separate, it enables managing every function from the simple centre, ergo decreasing the price to engage in to man power and more equipment.

Page 1 of 3123»

Recent Posts


Warning: array_rand(): Second argument has to be between 1 and the number of elements in the array in /home2/uusipaiva/public_html/modernbatiks.com/mgtsub.php on line 10

Warning: Invalid argument supplied for foreach() in /home2/uusipaiva/public_html/modernbatiks.com/mgtsub.php on line 11
Copyright © 2018 Home For Eclosures